Mechanisms boxes

Blue Series mechanism boxes: safe and versatile installation in hollow walls.

For 1 to 4 modules: adaptable to your installation needs.
Efficient fixing: with metal claws or nylon cable ties.
Efficient models: optimised for better performance.
Glow-wire test: 850 °C for references declaring this result; check the data sheet.

Documentation

Videos

Ref. 5625GW

Flush mechanism box in hollow partition. For 1 module. Nylon ties fixing system.

Ref. 5725EG

Flush efficient mechanism box in hollow partition. For 2 modules. Fixing with metal claws.

Ref. 5825EG

Flush efficient mechanism box in hollow partition. For 3 modules. Fixing with metal claws.

Ref. 5625EG

Flush efficient mechanism box in hollow partition. For 1 module. Fixing with metal claws.

Ref. 5625

Flush mechanism box in hollow partition. For 1 module. Fixing with metal claws.

Ref. 5625E

Flush efficient mechanism box in hollow partition. For 1 module. Nylon ties fixing system.

Ref. 5625A

Flush mechanism box in hollow partition. For 1 module. Fixing with metal claws.

Ref. 5725GW

Flush mechanism box in hollow partition. For 2 modules. Nylon ties fixing system.

Ref. 5725

Flush mechanism box in hollow partition. For 2 modules. Fixing with metal claws.

Ref. 5725E

Flush efficient mechanism box in hollow partition. For 2 modules. Nylon ties fixing system.

Ref. 5825GW

Flush mechanism box in hollow partition. For 3 modules. Nylon ties fixing system.

Ref. 5825

Flush mechanism box in hollow partition. For 3 modules. Fixing with metal claws.

Ref. 5825E

Flush efficient mechanism box in hollow partition. For 3 modules. Nylon ties fixing system.

Ref. 5925GW

Flush mechanism box in hollow partition. For 4 modules. Nylon ties fixing system.

Ref. 5925

Flush mechanism box in hollow partition. For 4 modules. Fixing with metal claws.

Blue wiring device boxes: one to four gangs

Blue wiring device boxes house compatible switches, sockets and other devices in hollow walls. The range includes one- to four-gang formats with nylon-tie or metal-claw fixing, plus versions described as efficient. Compare the entries, fixing arrangements and documentation of each reference rather than assigning one performance to every suffix.

References and differences

Reference	Specified format or purpose
5625GW	1 gang; nylon-tie fixing; Ø 68 × 46 mm
5725GW / 5825GW / 5925GW	2 / 3 / 4 gangs
5625EG	1 gang; metal claws; flexible membrane entries
5625E	1 gang; efficient version with nylon-tie fixing

The 5625GW specifies Ø 68 × 46 mm and a Ø 68 hole saw, with four Ø 20 and two Ø 25 mm conduit entries. The 5625EG has flexible membrane entries and metal claws; 5625E uses nylon ties. For multiple-gang formats, follow the reference drawing: an individual Ø 68 hole does not define the whole cut-out or centre spacing.

Selection and installation planning

Match gang count, device, mounting support and frame. Check permitted board thickness, cavity depth and conduit entries before marking. UN5625GW is specified for 5625GW and 5625A; 5625UNIÓN is for 5625. Connectors and fixings are not interchangeable merely because they belong to Blue.

Consult Solera technical documentation to verify drawings, installation conditions and included parts. Also compare Blue range accessories / Junction boxes. The Blue range for hollow walls page groups all branches.

Frequently asked questions — Wiring device boxes

How do 5625GW and 5625EG differ?

Both are described as one-gang, Ø 68 × 46 mm boxes. The 5625GW uses nylon ties and knockout entries; 5625EG uses metal claws and declares flexible membrane entries. Check the instructions for the selected version.

Do all boxes use the same Ø 68 cut-out?

The Ø 68 hole-saw requirement is verified for individual references such as 5625GW and 5625EG. Two-, three- and four-gang boxes require their own cutting drawing and centre spacing.

Which connector should I order?

UN5625GW is specified for 5625GW and 5625A. The catalogue lists 5625UNIÓN for 5625. Identify the box before ordering and check the assembly instructions.